SANYO Kerosene Heater Wicks

The finest quality, longest lasting CUI wicks - made by Hattersley in England! 
Wicks are individually packaged, include instructions and mailed worldwide.

24

OHR-H16A; OHR-G23H, Cabit (65mm wick)

$9.95

2

OHR-G25A, OHR-G28H;  OHR-25SBA (OZ) (85mm wick)

$10.95

7

OHR-G28S, G25S, -G25A/B (95mm wick) (OHW-95-3-R wick)

$9.95

3X

OHR-G30A; OFC-G41A; OHC-41H; OHC-42A; (Wick OHW-120A, B, C, D; OHR-300; OHC-420; OHC-510; OHR-1410, 1420, OHC-2010, 2020.   (American Electronic Products Corp, Spring, TX, KTC208)  (120mm wick)

$10.95

24

OHR-240; (Wick OHW-65A, B)

$9.95

2

OHR-261; (Wick OHW-85A, B), 262, OHR-280, OHR-1010; OHR G26HT; OHR M20

$10.95

IG-3

 Use Igniter #3

$4.95

IG-2

 except for Sunbeam #2

$5.95

Igniters - "Breathe Easy" Catalytic filters - Mica windows - Battery powered pumps

Center Draft Lamp wicks  -  Flat lamp wicks

Sometimes the decal with the model number is missing or scratched from Sanyo and Sunbeam heaters sold under the Sunbeam label.  Because of the similarity of model numbers, even a slight defacement of the decal is enough to render exact identification of a specific model almost impossible.  Fortunately, Sanyo used standard wick diameters to vary the BTU/hr output of a heater, and so it is possible to identify the wick needed by measuring the wick gap.  Sanyo was a fine manufacturer of heaters and did not use pinned wicks.

Wick #24  is 2 9/16" (65mm) in diameter.   (Small radiant heater)
Wick #2 is 3 3/8" (85mm) in diameter.        (Mid-sized radiant heater)
Wick #7X is 3 3/4" (95mm) in diameter.      (High output radiant heater)
Wick #3X is 4 3/4" (120mm) in diameter.    (Large convection heater with 20,000 + BTU)

If you have a question, please e-mail me at milesstair@hughes.net

Printable Mail Order Form - Click here

 

 RESOURCE INFORMATION:

Home Page